|
| |  | Instant-Read | Home » » » » » » Taylor 5* Commercial Instant Read Thermometer - Analog | | | | | | | Description: | | This analog instant read thermometer for the serious chef features accurate temperature control, easy readability, and commercial quality and reliability. The extra-large dial face is easy to read and has a shatterproof plastic lens. The thermometer's stainless steel stem is stored inside an anti-microbial plastic storage case to inhibit the growth of pathogens; the case doubles as a recalibration wrench.
Capacity: 0 - 220°F/-10 - 100C in 2°F/1C increments
Dimensions: dial: 1¾"Dia; stem: 5"L
Warranty: 5 years
NSF listed | | | Features: | |
• This analog instant read thermometer for the serious chef features accurate temperature control...
• Sold individually
• Capacity: 0 - 220°F/-10 - 100C in 2°F/1C increments
• Dimensions: dial: 1¾"Dia; stem: 5"L
| | | Product Details: | | | Product Length:
| 1.0 inches | | Product Width:
| 1.0 inches | | Product Height:
| 5.5 inches | | Product Weight:
| 0.05 pounds | | Package Length:
| 6.5 inches | | Package Width:
| 2.2 inches | | Package Height:
| 0.2 inches | | Package Weight:
| 0.02 pounds | | Average Customer Rating:
|  based on 244 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 244 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
189 of 191 found the following review helpful:
 Indispensable kitchen toolJan 09, 2002
By Frank Lynch
"frank_lynch"
There may be better instant read thermometers out there, but this has always done the trick for me, whether it's testing the water in baking bread or quickly finding out whether a roast is done. Its slender needle goes into hunks of meat quickly, and the whole thing is light enough that, if you are concerned that your burgers on the grill are properly cooked, you can easily put this in your pocket as you head to the back yard. Small note of caution for other dummies like me: the dial is under a plastic window, and so the whole thing should not go -in- the oven. For that, you want a meat thermoeter with a glass face.
116 of 119 found the following review helpful:
Excellent for a great French pressed coffeeMar 23, 2007
By Manish Laxmikant
Everyone talks about how convenient, versatile and simple this little thing is. It's great.
Information you might wonder about, and my coffee method:
- Size: It's about the length of a ball-point pen, and comes with a holder that looks like one. The head is about the size of a quarter.
- Speed: The needle moves a lot faster than the liquid in a candy thermometer. Instant-read it's not, unless you mean that you can instantly read the temperature after the needle stops moving. But it's still pretty fast, and as you see the needle slow down, you get a pretty good idea of where it's going to stop. Kind of like knowing where you'll stop when you hit the brakes. So, it gets more useful as you get used to it.
- Accuracy: I tried it with boiling water, and with an ice-water mix that had been shaken around. It's pretty accurate - accurate enough for most uses.
- Coffee: I use it mostly for making French pressed coffee. If you put boiling water in coffee grinds, you will likely get a bitter brew. I pick the pot right before it reaches a boil and use this little device to read 205 degrees F. Drop the water into a french press containing coarse grounds, and four minutes later you have excellent coffee. Thanks to this little guy I discovered that eyeballing the water in the kettle is not a good way to figure out the right temperature.
95 of 100 found the following review helpful:
Keep it Stupid Simple.May 26, 2002
By Belladonna Le Femme
You can keep your bulky & fragile digital readout probes, I'll take a good ol' thearmalcouple any day. I've tried various digitals & EVERY SINGLE ONE stopped working over time(no, not a dead battery). I've had dozens of similar probes as this Taylor model over the years & always lose them before they stop working. The only thing I don't care for is the soft plastic, somewhat bulky sheath. However it does have a notch for recalibrating so needle nose pliers aren't neccisarry.
39 of 39 found the following review helpful:
Taylor ThermometerAug 28, 2005
By T. Haskell
I am a cook for the US Army, and I have been using Taylor Instant-Read Dial Thermometer's for over 5 years now. It is quick reading, easy to use, and reliable. I would use this thermometer over any of the newer digital ones. Most thermometers as with most things need to be recalibrated. Taylor has supplied a calibration device on the carry case!
On top of all of the great features that the Taylor Analog Thermometer has, its also a bragain. At just $6.99 each you can not beat it!
I would recommend this product to anyone who does any type of cooking. This is ecspecially helpful when cooking Chicken, as you can test all of your piece quickly to make sure that all are done.
28 of 29 found the following review helpful:
 Constantly goes out of calibrationMay 31, 2009
By Benjamin W. Pearre
I've owned one of these for about a year, and always handled it gently. But the thing is constantly putting itself way out of calibration. One day water boils at 202F (I live in Colorado), the next day it boils at 178F. I keep a wrench in my kitchen so I can always boil a batch of water, calibrate it, and then actually measure what I need to. But that is a huge pain and a waste of energy. Right now it's sitting in a bucket of ice water. This is very special water indeed--it's 12F!
Other than its ability to measure temperature, yeah, it's great.
See all 244 customer reviews on Amazon.com
| | |
|
